Journeyman Pipefitter Practice Test

These questions are part of the practice quiz. Start practicing

• If a boiler steam outlet exceeds a specified size, what type of valve must be used according to the ASME power piping code?
• Which of the following items is not common practice in a reducing station?
• If boiler drain lines are used both as drains and blow offs, how many valves are required?
• In terms of valve sizing, what should the relationship be between multiple high-pressure safety valves mounted on a boiler?
• What is the maximum suggested pipe support spacing for 6 inch pipe for water service?
• Which cast iron item is not allowed on a high-pressure boiler?
• What is a key consequence of friction loss in a piping system?
• What does "friction loss" refer to in piping systems?
• Explain the function of a suction line in a piping system.
• What is "bonded" insulation in pipefitting?
• What type of ASME stamp is required when welding high pressure piping in boiler external piping?
• What is a key role of the bourdon tube within a steam pressure gauge?
• To what height must low water fuel cutoff devices be piped in relation to the gauge glass?
• Which type of safety valve mounting is not allowed according to the Heating Boiler Code?
• What does "dead end" mean in a piping system context?
• Describe the function of a fire hydrant in a piping system.
• High pressure pipe welding must be qualified according to which section of the ASME code?
• What minimum pressure must a boiler achieve before the pipe fittings should be at least schedule 80?
• When selecting a pipe material, which of the following factors is least considered?
• When are steam valves required in a piping setup?
• What is one common consideration for depth in piping systems?
• Where is the required boiler feedwater stop valve located on a high pressure boiler?
• How often should maintenance checks be performed on piping systems according to general recommendations?
• What is the required opening area between the boiler and safety valve?
• How should the discharge pipe of a high-pressure safety valve be configured?
• What might be a consequence of improperly sized safety valves on a boiler?
• What size is the required connection for a thermometer on a hot water heating boiler?
• What is the primary concern regarding the installation of the safety valve in relation to the boiler?
• What is the consequence of having condensate present in steam lines?
• What is the primary purpose of a mixing valve in a piping system?
• What is the minimum cross-sectional area requirement for a discharge pipe used on a safety valve?
• What is the greatest length allowed for intervening pipe or fitting connecting to a safety valve?
• The hanging rod supporting a pipe of 2 inches NPS or smaller must be at least what diameter?
• Where should safety valve or safety relief valve discharge be located?
• Which type of valve is specifically noted as needing to be locked and sealed open if used between a boiler and water column?
• What does "cold working" refer to in pipe fabrication?
• Under what condition should mufflers not be used on a safety relief valve according to ASME code?
• Which aspect is crucial to optimize fluid dynamics through piping systems?
• What is the recommended design for the discharge outlet of a safety valve?
• At what temperature must all valves or cocks on a heating boiler be rated at a minimum?
• After assembling a cast iron steam heating boiler, what is the hydrostatic test pressure requirement?
• What does the term “boiler blowoff” refer to?
• What type of piping component is used primarily for balancing temperature?
• What is the minimum size connection required for piping a high-pressure boiler?
• Under which condition is a Pipefitter license required?
• What is the minimum bottom drain connection size for a high temperature water boiler?
• What type of valve is typically used for regulating water flow in heating systems?
• What is the pressure rating of valves and fittings required on external piping of high pressure boilers?
• What is one of the main goals when designing fire sprinkler systems?
• What is the purpose of a header in a piping system?
• What is the function of a sump pump in a piping system?
• What does "NPS" stand for in the context of piping?
• What is the correct type of safety valve for a hot water boiler?
• What is the term for the loop arrangement that prevents water in a boiler from being forced below a safe water level?
• The dial of the pressure gauge on a high-pressure boiler should be graduated to no less than how many times the pressure at which the safety valve is set?
• What is the significance of maintaining a proper slope in drainage pipes?
• What is the primary purpose of a safety valve on a boiler?
• Where is the automatic non-return valve located on a high pressure boiler?
• Which code must be followed when installing a high-pressure boiler for pressure piping?
• During a hydraulic calculation, which factor is NOT typically assessed?
• What is defined as the removal of wastewater and stormwater from structures through a series of pipes?
• What function does an air vent serve in a piping system?
• What is the minimum temperature rating for all valves or cocks on a heating boiler?
• High-pressure steam boilers must have one or more of what safety device?
• What is the most suitable valve for a surface blowdown system?
• What type of welds are required for the attachment of slip on flanges according to ASME B311 power piping code part six?
• What is the purpose of having two or more safety valves on a boiler with a large heating surface?
• If a low-pressure steam boiler has only one set of 1 inch equalizing tappings, what is the best approach for an auxiliary low-water cut-off?
• What is the function of a pressure relief valve?
• What is the function of the check valve in a boiler system?
• In a boiler system, why is a meter valve used?
• What is a common result of improperly sized pipes?
• What is the temperature limitation for a 150 psi class bronze threaded gate valve according to high-pressure boiler code?
• In relation to piping systems, what does the term "gravity return" typically refer to?
• What is the minimum pressure rating for valves and fittings on steam lines for external piping of high pressure boilers?
• What does the relieving capacity of a safety valve indicate?
• When a high-pressure boiler plant only has one boiler, which statement is true?
• According to ASME B31.3 Power piping code, what is the maximum diameter for slip-on flanges to be used for boiler external piping?
• What is the purpose of a pipe hanger clamp?
• When pressure exceeds 100 psi, what schedule should boiler low off fittings be?
• What safety measure should be taken with safety valves attached to steam drums?
• Why is insulation important on chilled water pipes?
• What does the term 'flow rate' typically refer to in piping systems?
• What kind of connections should be avoided for low-water cut-off installations?
• Which condition is important to consider regarding underground piping?
• What is the minimum pipe size connection when piping a steam pressure gauge to the boiler using steel or wrought iron pipe?
• What is defined as a device that regulates, directs, or controls the flow of fluids in piping systems?
• Why are pressure ratings crucial in piping design?
• What types of joint designs are preferred in piping systems that experience high vibration?
• Identify a common failure point in piping systems.
• Which of the following correctly describes a function of the drain cock in a water column?
• What is the minimum pipe size for feed connections on high-pressure boilers with more than 100 ft.² of heating surface?
• What is the minimum temperature rating for all valves or cocks on a heating boiler?
• What is the recommended practice for installing a valve in a piping system?
• Which device is responsible for causing a safety shutdown that requires a manual reset?
• What role does a header play in a fire sprinkler system?
• How can improper installation of pipe hangers affect a piping system?
• What type of pipe fitting would most likely allow for a change in direction of flow?
• Which type of valve offers the least resistance to flow?
• What is the significance of having flanged or welded connections for safety valves over a certain size and pressure?
• What is the minimum cross-sectional area requirement for steam safety valves installed between the boiler and superheater?
• What is the minimum pressure rating required for all valves or cocks on a heating boiler?
• What is the minimum size required for the drain pipe and blow off valve on a low water cutoff with a separate float chamber?
• Which of the following fittings is NOT commonly used in piping systems?
• What type of information is typically included in pipe specifications?
• When connecting two or more high-pressure boilers to a common steam heater, how many stop check valves are required near each boiler with a manhole opening?
• What is the minimum BTU heat input for which a Massachusetts pipefitting license is required to work on heating systems?
• What is the purpose of a cleanout in a drainage system?
• Which type of valve is considered inappropriate as a boiler steam outlet valve?
• What does "thermal expansion" in piping systems refer to?
• When referring to the installation of a high-pressure boiler in Massachusetts, which ASME code section should be consulted?
• In high-pressure systems, what should be the orientation of steam piping to minimize stress?
• According to regulations, what size must the manifold and common source connection to the boiler be when multiple process controls are used?
• According to ASME high-pressure boiler code, how many square feet of heating surface requires the installation of two or more safety valves?
• What does "ASME" stand for, and what is its relevance to pipefitting?
• When are two low water cut-offs required on a steam heating boiler?
• What is the maximum size limitation for NPS class 600 socket welded flanges according to ASME power piping code B311?
• Which chapter of MGL governs the Pipefitter license?
• In terms of internal boiler inspection, what must the connections to the water column allow?
• What type of valve is required for stop valves on a high-pressure boiler?
• Which component is essential for ensuring safe operation of steam boiler systems?
• In heating systems, safety valves are primarily used to prevent what condition?
• Why is it significant to test a new piping system before operations?
• For hanging rods that support pipes of 2 1/2 inch NPS or larger, the rod diameter must be at least what size?
• What is the standard size of the pipe that connects to a drain valve in water column applications?
• What type of fitting must be installed at every right angle in water piping to facilitate cleaning and inspection?
• Why is the selection of a proper trap important in a piping system?
• What factors should be considered when designing underground piping systems?
• What is the purpose of a siphon in a boiler system?
• Which type of valve is permissible between a boiler and a water column?
• What is the minimum size of blow-off pipe and valve required on a cast iron heating boiler with a safety valve relieving capacity of 3000 pounds per hour?
• What is the maximum size for a surface blow off connection in a boiler?
• What condition causes water hammer in steam lines?
• What is the requirement for the connection of safety valves or safety relief valves to a boiler?
• What is the primary function of a pressure gauge in a piping system?
• What is the purpose of a pressure relief valve in a hot water boiler?
• What is the primary function of a safety valve in a piping system?
• What is the minimum height above the lowest permissible water level for the lowest visible part of the water gauge glass on a water tube boiler?
• What ASME stamp is required for an assembly of a high-pressure boiler?
• Which type of safety valve body is prohibited for installation in high temperature water boilers?
• According to heating boiler code, where should an additional stop valve be placed when one is used in the supply pipe connection of a single steam boiler?
• What common issue can occur with PVC piping in high-temperature applications?
• Why is it important for safety valves to be sized appropriately relative to each other?
• Where should a low-water cutoff be installed on a hot water heating boiler?
• Which of the following valves is typically used as a stop valve in a high-pressure boiler?
• Why is it important to follow installation requirements for safety valves?
• What is a common challenge when working with underground piping systems?
• How do threaded joints differ from welded joints?
• What material is commonly identified for softness in high-temperature applications?
• What is a "code compliance inspection" in pipefitting?
• Which of the following are common methods used for corrosion control in piping systems?
• Which of the following best describes the role of a valve in a piping system?
• At what altitude is an altitude gauge required on a hot water supply boiler?
• What is the key benefit of installing an auxiliary low-water cut-off?
• In the event of valve failure, what role does the safety valve play in a boiler system?
• What does the acronym MAWP stand for in piping systems?
• How many complete turns does a slow opening valve require to be fully opened or closed?
• In terms of design, what is a key aspect of routing pipes?
• What is the role of a trap in a piping system?
• Which of the following must be assessed for underground piping installation?
• What would be the consequence of not adhering to pipe size limitations in high-pressure boilers?
• Which regulation specifies the installation requirements for control devices for automatically fired boilers in Massachusetts?
• What does the term "flow rate" refer to in a plumbing context?
• Why are low water cut-offs important in steam heating boilers?
• An ASME code stamp is needed for what part of a boiler installation?
• What is the maximum size for a blow off used on a high pressure boiler with less than 100 square feet of heating surface?
• What is the purpose of an expansion joint in a piping system?
• What is the function of a boiler water column?
• Which valve is appropriate for a boiler blow off valve on a high pressure boiler?
• What does the acronym "ANSI" stand for in relation to piping standards?
• What is the maximum suggested pipe support spacing for 6 inch steam gas or air service?
• What is the implication of having a smaller safety valve with a relieving capacity below 50% of the larger valve?
• What is a common type of valve used in steam systems?
• Which element plays a crucial role in preventing pressure build-up in piping systems?
• What is the primary purpose of a pipe support?
• What protects the bourdon tube in a steam pressure gauge?
• Why is it important to maintain proper pipe insulation?
• Which of the following is an effect of cold working on metal pipes?
• What does "piping layout" involve during the design process?
• What does a reducer fitting do in a piping system?
• What is the minimum unrestricted drain opening required for gauge glass drains?
• What is a non-return used for in boiler systems?
• Under the ASMEB311 power piping code, what material should boiler blow off fittings be made of?
• What is the role of the National Fire Protection Association (NFPA) in pipefitting?
• Under what condition can the size of bottom blow down lines be reduced?
• What is the requirement for the steam and water connections to a water column on a high pressure boiler?
• How is a pipe's nominal diameter typically determined?
• What is the primary function of a backflow preventer?
• What is the minimum relieving capacity percentage of a smaller high-pressure safety valve compared to a larger valve when mounted singularly on a boiler?
• What is achieved by using a valve in a piping system?
• What is the largest pipe size for threading a safety valve onto a steam drum of a high-pressure boiler?
• What happens if a high-pressure boiler lacks necessary safety equipment?
• How are fire sprinkler systems typically integrated into a building’s plumbing?
• What must protect the bourdon tube of a steam pressure gauge?
• What type of boiler connection requires a stop valve in the return pipe?
• What is the maximum pressure at which cast iron fittings can be used to carry steam?
• Why is a drain cock or drain valve required in a water column?
• What type of environments should be avoided for laying underground pipes?
• What is the purpose of hydraulic calculation in piping systems?
• In pipe insulation, what is the primary concern to prevent condensation?
• What is the primary function of a throttling valve?
• What should be avoided when installing high-pressure safety valves on a boiler?
• What is the maximum temperature limitation for nonferrous pipe used directly attached to a boiler?
• How should high-pressure safety valves be configured when used together on a boiler?
• Which of the following are primary components of a plumbing system?
• What percentage should the relieving capacity of a smaller safety valve not fall below for optimal safety?
• What type of inlet connection is required for a safety valve over 3 inches and over 15 psig?
• What is the purpose of a sediment trap in a gas piping system?
• What is the correct procedure for testing a gas line for leaks?
• Why is it important to have check valves in the connections of high-pressure boilers?
• Which of the following statements accurately reflects best practices for installing drain valves?
• What is mandatory to have installed on a separate connection on a hot water heating boiler?
• What does proper support from pipe hangers prevent in a plumbing system?
• What does pipe sizing involve in piping design?
• How does the valve type (slow opening vs fast opening) influence system pressure?
• What does preventing sagging or moving of pipes refer to in pipe support usage?
• What is the required size of the pipe that must be installed with the drain cock or drain valve in a water column?
• What is the significance of an unrestricted drain for a gauge glass?
• Where is the bottom blow-off line of a high-pressure water tube boiler typically connected?